FY Panda2 panda II Autopilot for Fixed WingPANDA2
Panda2 Autopilot mainly include:Panda2 Autopilot module, GPS module, Airspeed module,Power management module,Remote adapter module, communication system, GCS.Through our GCS software you can set flight waypoint,flight altitude,flight speed, Equidistance or Timing taking photo and so on.Also can control the aircraft to Automated circling, Automated Return to Home (RTH), Automated take off and Automated landing according the route setting. You can real-time change the flight task during the flight, convenient and flexible operation, easy installation and debugging. In addition there are many protected mode, can the greatest degree of guarantee reliable and flight safety. Could be used for unmanned aerial vehicles (uavs) automatically control or professional aerial photography.
1. PANDA¢ò provides high-precision flight attitude measurement and control through the utilization of an integrated 32 bits microprocessor, GPS receiver, three-axis MEMS gyros, three-axis accelerometer, three-axis magnetic sensor, accurate barometric pressure sensor, attitude algorithm, Kalman filtering and data fusion algorithms.
2. Combined the attitude module and the control module, get more small volume and lighter weight.
3. Realize auto take off and auto land, maximum reduce the operating pressure.
4. Can accord to the plane internal space to adjust the install direction , easier to complete the connection.
5. 10Hz data rate GPS receiver, 35 seconds fast positioning time and accuracy of 2.5 meters CEP. The GPS can record the positional parameter with battery , the locating time greatly improved.
6. 100HZ inner attitude control, 10HZ outer navigation control.
7. Multi-channel mixed-control output can be adjusted with ease. The control options include:
- a) Elevator and rudder navigation
- b) Elevator, aileron and rudder navigation
- c) Elevator and aileron mixed-control (elevon) navigation
- d) V-tail rudder may be used, however a third party mixer have to be supplied by the user.
8. Three control modes:
- a) Manual Mode ;
- b) AFSS activated (Active Stabilization) ;
- c) Automatic navigation control.
9. Two automated navigation control modes:
- a) Air route navigation mode
- b) Mouse controlled flight mode.
10. Three special flight modes:
- a) Fixed circling mode;
- b) Auto Return to Home (RTH) mode;
- c) Auto take-off mode.
(On Fixed circling mode and Auto Return to Home(RTH)mode,Panda has 50m altitude protection limited,if the switch point altitude below 50m,Panda will automatic climb to 50m.)
11. Any standard RC transmitter and receiver can be used with this system.
12. Automated RTH (Return to Home) protection when there is a break in GCS communication link via the data radios. This time the system is working only in the data radio control mode.
13. Panda¢ò can Integrated automatic and manual aerial photography triggering. Equidistance or Timing taking photo. Combine with the POS data record module can record the current flight attitude info of the taking photo point, for example the Longitude, latitude, altitude, speed, etc.
14. The GCS software helps integrate Automated and Manual flight control modes in an easy to use display interface.
15. The GCS software includes electronic map formatting. By using the electronic map, aircraft route and tasks can be modified in real-time via your GCS computer.
16. Real time display on the GCS includes flight parameters such as main pack voltage, mAh consumed, Amp draw, GPS satellite strength and temperature of the autopilot unit.
17. All flight parameters are downloaded automatically by the GCS for instant playback.
18. IMPORTANT: GCS Function
- ? When using the Data Radio to control the aircraft, the controlling signals from the RC Receiver is directly sent to the Remote Adapter and converted to digital signals. The Data Radio will then upload the commands to your aircraft via the data radio.
- ? The GCS is only used to monitor telemetry and flight status of the aircraft. Transmission of commands is minimal. i.e. the aircraft is mainly controlled by your RC Transmitter. The autopilot still can realize most of the functions (for example, air route setting, RTH, circling) without the GCS.
19. Support the firmware update, can by yourself
> Related download :
>> FY-Panda2 firmware V1.22 : Download
>> FY-Panda2-POS-Read V1.0 softwar : Download
More FY-Panda2 related downloads: Click in
Conventional, V tail, elevon, no aileron, etc. Various kinds of layout form of small and medium-sized vehicle automatic navigation and driving.
All kinds of the airship automatic navigation and driving.
Our new design Panda2 is using the digital sensor chips and integrated structure, controller structure more compact. Panda2 is no need to external POS information record module and SD card for store the POS information. Panda2 has already built-in POS information record module, and in the POS information record module has 4M storage space, will automatically record photo-taken POS information. You can through the Data Radio directly connection to FY-Panda2-POS information read software to read the photo-taken Pos information. Optimize automated take off and landing,also simplify the flight operation. Panda2 can Integrated automatic and manual aerial photography triggering. Equidistance or Timing taking photo.Also Panda2 add Camera Gimbal Stabilization function.
The GPS working voltage is +5V.
Power Management Mdule
Panda2 can connect with the power management module, power management module has integrated current sensor. It can achieve a variety of power supply mode, Panda2 and servos can be separated power on, also both can be powered by power management module.
Air Speed Module
Panda2 can connect with the air speed sensor which automatically controls throttle and can make the aircraft more stable.
Remote Adapter Module And Data Radio
Panda2 can direct connection RC remote control receiver , also it can use the remote adapter and data radio to enhance remote distance. The role of the remote adapter is turning receiver signal to digital signal for data radio. Common remote control distance generally is at 600 meters, depending on the performance of the remote control and the RC receiver. This cannot meet the needs of long distance, after using data radio, remote control distance is decided by data radio, you can reach more than 10KM, completely solve the problem of long-range FPV flight. Data radio can also be connected to the FY-GCS ground station software to monitor the recording flight path and data.
GCS ground station software, used to set the flight parameters, mission planning, monitoring in flight. Software integration of electronic map function can through the map software the Google earth live map out into the GCS software. The main function is
Parameter Settings ¡ª Control parameters setting, course setting, etc.
Real time monitoring ¡ª It can monitor flight attitude. And via the GCS software you can change the flight altitude in real time and realize the mouse click flight.
Record and monitoring flight ¡ª You can monitor and download flight path via the GCS software in your computer.
More versions of the GCS software, please click in